After being crushed
After being crushed

After being crushed, the limestone can be used as construction material or industrial raw material, and it is an important raw material resource. However, the main constituent of limestone is adamant calcium carbonate whose mohs' hardness is 3. Besides, its compressive strength is very high, which can be up to 60 to 140 MPa in vertical bedding direction and 50 to 120 MPa in parallel bedding direction. Therefore, it needs professional limestone jaw crusher to process it.

limestone Jaw crusher

Limestone jaw crusher is composed of bracket;jaw;eccentric shaft;jaw plate; spring, etc. The maximum compression strength of materials to be crushed is 320MPA. It is commonly used for primary crushing,secondary crushing and fine crushing.We not only supply the single equipment, but also provide complete limestone production line.

limestone Jaw crusher limestone Jaw crusher limestone Jaw crusher limestone Jaw crusher limestone Jaw crusher


Jaw crusher

120-180TPH Limestone Crushing Line In Indonesia

120-180TPH Limestone Crushing Line In Indonesia

Limestone crushing line consists of jaw crusher, impact crusher, vibrating screen, vibrating feeder, etc.We can provide you the well-shaped final products, with low energy consumption, low cost, easy maintenance, and high efficiency.

limestone Jaw crusher limestone Jaw crusher

Service of limestone jaw crusher

We provide complete and considerate pre-sale service
We provide complete and considerate pre-sale service, sale service, after-sale service for you, such as product selection, product delivery, product installation and debugging, etc
We insist on providing clients with overall
We insist on providing clients with overall solutions from equipment recommendation to debugging and installation, worker training, technical support and maintenance.
As the manufacturer and supplier
As the manufacturer and supplier, we can provide you the most reasonable limestone jaw crusher price (factory price). Moreover, discount can be given according to quantity.

Solutions to the problems of limestone jaw crusher

Limestone jaw crusher is one of the most commonly used crushing devices in the limestone production line. Because of the hard working environment of jaw crusher, in the long-term use process, breakdown is inevitable.The following are the solutions to the common problems:

Failure: Bracket rupture
Click here for solutions
Failure: The temperature of the bearing is too high
Click here for solutions
Failure: The main engine stops suddenly
Click here for solutions
Failure: The production granularity turns thicker
Click here for solutions

Service Procedure

Service Procedure


If you have any problems about our product and service,please feel free to give your inquiry in the form below. We will reply you within 24 hours as soon as possible.Thank you!

Name Product
Email Address* Phone Number*
If you need specific information about our products, please fill in the following form!


When we receive your inquiry, we will contact you within 24 hours and at the same time, our sales man and engineer will identify all details with you and help you find the best solution together.



After good communication, we will provide the most proper and satisfying project design(complete production line or single equipment) with competitive price for you. If you are satisfied with our product and service, we can sign the contract.

Shipment Installation

Shipment & Installation

Our ocean freight partners include APL, COSCO, OOCL, CSCL, MSC, etc. The products can be delivered within 0~15 days. We will remind you before arrival. Also, our engineers will be dispatched to your country to help you install the machine until the plant work well.

Feed opening
Max.feeding size
Adjusting range of  
discharge opening (mm)
Processing capacity
Rotation speed of eccentric shaft
Motor power
Total weight
PE-150×250 150×250 125 10-40 1-3 250 5.5 0.8 720×660×850
PE-250×400 250×400 210 20-60 5-20 300 15 2.8 1300×1090×1270
PE-400×600 400×600 340 40-100 16-60 275 30 7 1730×1730×1630
PE-500×750 500×750 425 50-100 40-110 275 55 12 1980×2080×1870
PE-600×750 600×750 500 150-200 80-240 275 55 15.8 2070×2000×1920
PE-600×900 600×900 500 65-160 50-180 250 55 17 2190×2206×2300
PE-750×1060 750×1060 630 80-140 110-320 250 110 29 2660×2430×2800
PE-800×1060 800×1060 640 130-190 130-330 250 110 29.8 2710×2430×2800
PE-830×1060 830×1060 650 160-220 150-336 250 110 30.7 2740×2430×2800
PE-870×1060 870×1060 660 200-260 190-336 250 110 31.5 2810×2430×2800
PE-900×1060 900×1060 685 230-290 230-390 250 110 33 2870×2420×2940
PE-900×1200 900×1200 750 95-165 220-450 200 110 52 3380×2870×3330
PE-1500×1800 1500×1800 1200 220-350 500-1000 180 280-355 122 5160×3660×4248
PE-1600×2100 1600×2100 1500 300-400 1300-2200 160 350-380 150.6 6210×4013×4716
PEX-150×750 150×750 120 18-48 8-25 320 15 3.8 1200×1530×1060
PEX-250×750 250×750 210 25-60 13-35 330 30 5.5 1380×1750×1540
PEX-250×1000 250×1000 210 25-60 16-52 330 30 7 1560×1950×1390
PEX-250×1200 250×1200 210 25-60 20-61 330 37 9.7 2140×1660×1500
PEX-300×1300 300×1300 250 20-90 16-105 300 55 15.6 2720×1950×1600

Bracket rupture

Bracket rupture: when the jaw crusher is over load or when non-crushed materials enter the crushing cavity, it is easy to cause bracket rupture. At this moment, we should change the bracket, and control the material feeding granularity to avoid non-crushed materials entering the crushing cavity. We should also try our best to avoid the main engine working over load. If the bracket cushion has been worn, we should replace it with the bracket and chose the qualified bracket and install it correctly.

The temperature of the bearing is too high

The temperature of the bearing is too high: under normal working condition, the temperature rise of the bearing should not exceed 35℃ and the highest temperature should not exceed 70℃. If the temperature were too high, we should add some proper lubricating grease, adjust the tightness of the bearing with spacer, repair and arrange the base tile of the bearing or change the bearing, because this situation is caused by improper interval between the bearings, bad connecting of the bearing or bearing breakdown.

The main engine stops suddenly

The main engine stops suddenly: If this phenomenon happens, we should check whether the material discharging mouth is blocked firstly to make sure smooth material discharging. Secondly, check whether the triangle belt is too loos, if so, fasten or change the triangle belt. At last, check whether adapter sleeve of the eccentric shaft is loos, if so, the eccentric shaft will be jammed, and we should install or change the adapter sleeve again.

The production granularity turns thicker

The production granularity turns thicker: when the bottom of the jaw crusher toothed plate is worn seriously, the production granularity will become thicker. Under this situation, we should turn the toothed plate around, or adjust the material discharging mouth, and then this situation will be improved obviously.